dymokomi/luce-cad
Source of release 0.9.3
0.9.3 / tests / regressions / mixed_chart_tests.luc
## One clipped rational chart and one mapped analytic chart share a split ring.
## A complete rail must be seeded before either surface adds its own rows.
from luce_cad.model import BrepModel
from luce_geocore.geocore import Vector3
from checks import near
from luce_std import math
pub func mixed_chart_tests() -> unit!:
for split_angle in [2.1,math.pi*0.5+0.00001]: mixed_ring(split_angle)
mixed_ring(2.1,0.0000003)
print("PASS mixed NURBS/analytic charts, complete split-rail seeds and shared circular flow")
func mixed_ring(split_angle: float, rail_noise: float = 0.0) -> unit!:
let model = BrepModel()
let z = Vector3(0.0,0.0,1.0)
let x = Vector3(1.0,0.0,0.0)
for p in [x,x.add(z),Vector3(math.cos(split_angle),math.sin(split_angle),1.0),x.add(z.multiply_scalar(2.0))]:
_ = model.add_vertex(p)
for pair in [[0.3,0.3],[0.7,0.3],[0.7,0.7],[0.3,0.7]]:
_ = model.add_vertex(Vector3(math.cos(pair[0]),math.sin(pair[0]),pair[1]))
_ = model.add_circle(0,0,Vector3(),z,x,1.0)
_ = model.add_line(0,1)
_ = model.add_circle(1,2,z,z,x,1.0)
_ = model.add_circle(2,1,z,z,x,1.0)
_ = model.add_circle(3,3,z.multiply_scalar(2.0),z,x,1.0)
_ = model.add_line(1,3)
_ = model.add_circle(4,5,Vector3(0.0,0.0,0.3),z,x,1.0)
_ = model.add_line(5,6)
_ = model.add_circle(7,6,Vector3(0.0,0.0,0.7),z,x,1.0)
_ = model.add_line(4,7)
let ring = [Vector3(1.0,0.0,0.0),Vector3(1.0,1.0,0.0),Vector3(0.0,1.0,0.0),Vector3(-1.0,1.0,0.0),Vector3(-1.0,0.0,0.0),Vector3(-1.0,-1.0,0.0),Vector3(0.0,-1.0,0.0),Vector3(1.0,-1.0,0.0),Vector3(1.0,0.0,0.0)]
let controls: list[Vector3] = []
let weights: list[float] = []
for at in 0..<ring.length:
for v in [0.0,1.0]:
# An independently fitted support differs from its exact circular
# CAD trim within the model tolerance. Its inverse UV rail wavers;
# that must not seed an unrelated angular family.
controls.append(ring[at].add(z.multiply_scalar(v+(rail_noise if v == 1.0 and at == 2 else 0.0))))
weights.append(1.0 if at%2 == 0 else math.sqrt(0.5))
_ = model.add_spline_surface(controls,weights,9,2,2,1,[0.0,0.0,0.0,0.25,0.25,0.5,0.5,0.75,0.75,1.0,1.0,1.0],[0.0,0.0,1.0,1.0])
_ = model.add_surface(1,Vector3(),z,x,1.0)
_ = model.add_face(0,[1,2,-4,-3,-2,10,9,-8,-7],[5,4])
_ = model.add_face(1,[3,4,6,-5,-6],[5])
let mesh = model.mesh(8)
let parents = mesh.find_attribute("cad_face",2)
let methods = mesh.find_attribute("cad_mesher",2)
let islands = mesh.find_attribute("cad_flow_island",2)
let uses: list[int] = []
let degree: list[int] = []
for e in 0..<mesh.edge_count(): uses.append(0)
for p in 0..<mesh.point_count(): degree.append(0)
var mapped_quads = 0
for face in 0..<mesh.face_count():
near(mesh.attribute_value(islands,face,0),0.0)
let owner = mesh.attribute_value(parents,face,0)
near(mesh.attribute_value(methods,face,0),2.0 if owner == 0.0 else 1.0)
if owner == 1.0:
assert(mesh.face_size(face) == 4)
mapped_quads += 1
for at in 0..<mesh.face_size(face): uses[mesh.face_edge(face,at)] += 1
var minimum = 10.0
var maximum = 0.0
var shared = 0
for e in 0..<mesh.edge_count():
let ai = mesh.edge_point(e,0)
let bi = mesh.edge_point(e,1)
degree[ai] += 1
degree[bi] += 1
let a = mesh.point(ai)
let b = mesh.point(bi)
assert(uses[e] == 1 or uses[e] == 2)
if math.abs(a.z-1.0)+math.abs(b.z-1.0) > 0.000001: continue
assert(uses[e] == 2)
shared += 1
let angle = math.acos(math.clamp(a.x*b.x+a.y*b.y,-1.0,1.0))
minimum = math.min(minimum,angle)
maximum = math.max(maximum,angle)
assert(shared >= 32 and mapped_quads >= 32)
for p in 0..<mesh.point_count():
let value = mesh.point(p)
near(value.x*value.x+value.y*value.y,1.0)
if math.abs(value.z-1.0) < 0.000001: assert(degree[p] == 4)
for triangle in 0..<mesh.index_count()//3:
let a = mesh.vertex(mesh.index(triangle*3))
let b = mesh.vertex(mesh.index(triangle*3+1))
let c = mesh.vertex(mesh.index(triangle*3+2))
let normal = b.position.subtract(a.position).cross(c.position.subtract(a.position))
for n in [a.normal,b.normal,c.normal]: assert(normal.dot(n) > 0.0)
assert(minimum > 0.005 and maximum < minimum*2.5)