dymokomi/luced-3d
Source of release 0.11.8
0.11.8 / tools / preview_modify.luc
## Stage 5's captures for preview.py (docs/research/POLY-MODELING.md): the
## everyday modify tools in Edit Mesh, shown with their wireframes.
## modify_knife: the Knife drawing a stroke over a box, its points
## snapped, the rubber band to the pointer, the hint on the notice line.
## modify_knife_cut: that stroke cut (Enter): the box's faces split along
## it, the cut edges selected.
## modify_bridge: a sphere's middle band gone, its loops bridged with 3
## cuts and a slight sphere Profile (0.15) closing it round again.
## modify_bridge_pick: Bridge run on one run: it waits for the second
## loop, the prompt on the notice line.
## modify_bridge_runs: a grid without its two middle rows, its two runs
## bridged with 3 cuts along Blend path: a flat strip, rows even.
## modify_grid_fill: a cylinder's top cap gone, the hole grid-filled.
## modify_solidify: a noisy bowl (a sphere's lower half, roughened),
## made a shell inside it with Even thickness.
## modify_poke: a box's faces poked out.
## modify_rip: a row of a grid's edges ripped open.
## modify_symmetrize: a lopsided sphere symmetrized, -X over +X.
## modify_screw: a short run screwed into a spring.
## modify_decimate: a sphere decimated to a third of its triangles.
## modify_subdivide: an L of a grid's faces subdivided: only they split,
## the faces around take the new points (the inner corner's cut).
from app import Luce3D
from luce_ui.ui import Event
from luce_window.input import EventKind
from luce_3d.graphics import Vector3
from luce_geocore.geocore import Selection
from view_projection import project
from edit_types import point_level, edge_level, face_level
import node_commands
import modeling_commands
import selection_commands
import placing_commands
import preview_support
from luce_std import math
pub func scenes() -> list[str]:
return ["modify_knife", "modify_knife_cut", "modify_bridge", "modify_bridge_pick", "modify_bridge_runs", "modify_grid_fill", "modify_solidify", "modify_poke", "modify_rip",
"modify_symmetrize", "modify_screw", "modify_decimate", "modify_subdivide"]
## An Edit Mesh holding primitive `name`.
func modeled(editor: Luce3D, name: str) -> unit!:
let w = editor.workspace
node_commands.delete_selected(w)
node_commands.add_node(w, "Edit Mesh", 40.0, 40.0)
preview_support.settle(w)
modeling_commands.create(w, name)
preview_support.settle(w)
## Run tool `label` on `expression` (on `domain`: 0 points, 4 edges, 2
## faces) at `level`, then set its numbers `slots` to `values`.
func tool(editor: Luce3D, label: str, level: int, expression: str, domain: int, slots: list[int] = [], values: list[float] = []) -> unit!:
let w = editor.workspace
let mesh = preview_support.shown(w) else trap("mesh")
selection_commands.set_mode(w, level)
w.selection = Selection.of(mesh, expression, domain)
modeling_commands.model(w, label)
preview_support.settle(w)
for index in 0..<slots.length:
modeling_commands.set_last_step(w, slots[index], values[index], -1.0e9, 1.0e9)
preview_support.settle(w)
## The knife's stroke over the box's top and down its front.
func stroke() -> list[Vector3]:
return [Vector3(-0.6, 2.0, -1.0), Vector3(0.2, 2.0, 0.3), Vector3(0.7, 2.0, 1.0), Vector3(0.7, 1.0, 1.0)]
## Scene `scene` before its first frame.
pub func setup(editor: Luce3D, scene: str) -> unit!:
let w = editor.workspace
var target = Vector3(0.0, 1.0, 0.0)
var distance = 5.2
var pitch = 0.55
if scene == "modify_knife" or scene == "modify_knife_cut":
modeled(editor, "Box")
modeling_commands.model(w, "Knife")
let points = stroke()
for point in points:
placing_commands.add_corner(w, point, Vector3(-0.35, -0.6, -0.7))
if scene == "modify_knife_cut":
placing_commands.finish_placing(w)
preview_support.settle(w)
elif scene == "modify_bridge":
# A sphere's middle band gone; its two loops bridged with 3 cuts and
# a slight sphere Profile closing it round again.
modeled(editor, "Sphere")
let sphere = preview_support.shown(w) else trap("sphere")
let box = sphere.bounds()
let middle = (box.minimum.y + box.maximum.y) * 0.5
let band: list[str] = []
for face in 0..<sphere.face_count():
if math.abs(sphere.face_center(face).y - middle) < 0.3:
band.append(f"{face}")
tool(editor, "Delete", face_level, band.join(" "), 2)
tool(editor, "Bridge", edge_level, "*", 4, [0, 2, 4, 5], [3.0, 1.0, 0.15, 1.0])
elif scene == "modify_bridge_pick":
modeled(editor, "Grid")
modeling_commands.set_last_step(w, 2, 6.0, 1.0, 1000.0)
modeling_commands.set_last_step(w, 3, 6.0, 1.0, 1000.0)
preview_support.settle(w)
tool(editor, "Delete", face_level, "12-23", 2)
tool(editor, "Bridge", edge_level, "p14-15-16-17-18-19-20", 4)
target = Vector3(0.0, 0.3, 0.0)
elif scene == "modify_bridge_runs":
modeled(editor, "Grid")
modeling_commands.set_last_step(w, 2, 6.0, 1.0, 1000.0)
modeling_commands.set_last_step(w, 3, 6.0, 1.0, 1000.0)
preview_support.settle(w)
tool(editor, "Delete", face_level, "12-23", 2)
tool(editor, "Bridge", edge_level, "p14-15-16-17-18-19-20 p21-22-23-24-25-26-27", 4, [0], [3.0])
target = Vector3(0.0, 0.0, 0.0)
elif scene == "modify_grid_fill":
modeled(editor, "Cylinder")
tool(editor, "Delete", face_level, "1", 2)
tool(editor, "Grid Fill", edge_level, "*", 4)
elif scene == "modify_solidify":
# A sphere's lower half, roughened: a noisy bowl, its shell inside.
modeled(editor, "Sphere")
let ball = preview_support.shown(w) else trap("sphere")
let bounds = ball.bounds()
let equator = (bounds.minimum.y + bounds.maximum.y) * 0.5
let upper: list[str] = []
for face in 0..<ball.face_count():
if ball.face_center(face).y > equator:
upper.append(f"{face}")
tool(editor, "Delete", face_level, upper.join(" "), 2)
tool(editor, "Noise", point_level, "*", 0, [0], [0.05])
tool(editor, "Solidify", face_level, "*", 2, [0, 2], [0.15, 1.0])
target = Vector3(0.0, 0.6, 0.0)
pitch = 0.75
elif scene == "modify_poke":
modeled(editor, "Box")
tool(editor, "Poke", face_level, "*", 2, [0], [0.6])
elif scene == "modify_rip":
modeled(editor, "Grid")
modeling_commands.set_last_step(w, 2, 6.0, 1.0, 1000.0)
modeling_commands.set_last_step(w, 3, 6.0, 1.0, 1000.0)
preview_support.settle(w)
tool(editor, "Rip", edge_level, "p22-23-24-25-26", 4, [0], [0.25])
target = Vector3(0.0, 0.0, 0.0)
elif scene == "modify_symmetrize":
modeled(editor, "Sphere")
tool(editor, "Noise", point_level, "@P.x>0.01", 0, [0], [0.35])
tool(editor, "Symmetrize", face_level, "*", 2)
elif scene == "modify_screw":
modeled(editor, "Grid")
modeling_commands.set_last_step(w, 0, 0.6, 0.0, 1000.0)
modeling_commands.set_last_step(w, 1, 0.6, 0.0, 1000.0)
modeling_commands.set_last_step(w, 2, 1.0, 1.0, 1000.0)
modeling_commands.set_last_step(w, 3, 1.0, 1.0, 1000.0)
preview_support.settle(w)
tool(editor, "Screw", edge_level, "p0-1", 4, [0, 1, 2, 3, 4, 5, 6], [1.0, 1.2, 0.0, 0.0, 4.0, 24.0, 0.8])
target = Vector3(0.0, 1.5, 0.0)
distance = 7.5
elif scene == "modify_decimate":
modeled(editor, "Sphere")
tool(editor, "Triangulate", face_level, "*", 2)
tool(editor, "Decimate", face_level, "*", 2, [1], [0.33])
elif scene == "modify_subdivide":
modeled(editor, "Grid")
tool(editor, "Subdivide", face_level, "5 6 9", 2, [1], [0.0])
target = Vector3(0.0, 0.0, 0.0)
distance = 4.2
w.view.yaw = 0.6
w.view.pitch = pitch
w.view.distance = distance
w.view.target = target
w.view.update_camera()
editor.panels.refresh()
## Window point of world point `p`.
func at(editor: Luce3D, p: Vector3) -> list[float]!:
let area = editor.panels.view.layout().bounds()
let on = project(editor.workspace, p, area.width, area.height)
return [area.x + on[0], area.y + on[1]]
## Frame `frame` of scene `scene` (from 2; `last` is the frame captured):
## the Knife's pointer rests past its last point.
pub func act(editor: Luce3D, scene: str, frame: int, last: int) -> unit!:
editor.app.focus(editor.panels.view.layout())
if scene == "modify_knife":
let end = at(editor, Vector3(0.7, 0.4, 1.0))
editor.app.dispatch(Event(kind = EventKind.pointer_moved, x = end[0], y = end[1]))
editor.panels.refresh()